Cabletron Systems T2015 Installationsanleitung PDF herunterladen (Seite 334)

100

101

324 Installation Guide for Clients

9 Use Open and Read.

0 = no Open and Read 1 = Open and Read on files with R (Read) and

W (Write) access 2 = Open and Read on files with R (Read), W

(Write), and X (Execute) access

The default is 2.

10 Controls network realization of MS-DOS commit calls as follows:

0 = flush dirty buffers to server and wait for server to flush buffers to

hard disk 1 = flush dirty buffers to server but do not wait 2 = flush

buffer when full or when job is done

The default is 1.

11 Control beeping while the workstation waits for a network request to be

processed. The value is set at 0 (no beeping) and cannot be changed.

12 Perform asynchronous read-ahead as follows:

0 = never perform asynchronous read-ahead 1 = perform asynchronous

read-ahead at buffer end 2 = perform asynchronous read-ahead for

second pass on a buffer

The default is 2.

13 Control three-way write, unlock, lock, and read SMB as follows:

0 = don’t issue 1 = issue

The default is 0.

14 Controls use of raw data transfer SMB protocols.

0 = don’t use 1 = use

The default is 1. Change to 0 to use Remote Access (dial-in).

15 Controls the use of hook interrupt 21 (INT21) as follows:

0 = hook INT21 1 = don’t hook INT21

The default is 0.

16–

Reserved

1 2 ... 329 330 331 332 333 334 335 336 337 338 339 ... 418 419

Kommentare zu diesen Handbüchern

Keine Kommentare

Cabletron Systems T2015 Installationsanleitung Seite 334

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cabletron Systems T2015