
Chapter 9 Network Device Driver Options 185
HP Ethertwist
Required entry:
• drivername = hplan$ or hplann$
This driver is for the following network adapters:
• HP Ethertwist PC Link (8-bit ISA)
• HP Ethertwist PC Link16 (16-bit ISA)
• HP Ethertwist MCA Adapter (HP27246)
Note
After using the Setup program to specify the device driver for the
HP Ethertwist network adapter, edit the PROTOCOL.INI file so that the
section heading is [hplan], not [hplan_nif].
The following table summarizes the possible entries and values in the
[hplan] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range
adapterslot integer 1–8
drivername ——
interrupt integer 2–7
ioaddress hex. 200–340
maxhwtrans integer 2–20
maxicnest integer 1–4
maxmulticast integer 1–50
maxswtrans integer 1–10
Entries in the [hplan] section of the LAN Manager PROTOCOL.INI file
have the following meanings:
adapterslot
Indicates the slot number of the network adapter that the driver is to
use.
drivername
Identifies the driver name of the network device driver. The base
portion of the filename, plus a digit when more than one adapter is
installed, is the drivername. The drivername is hplan$ for the first
adapter, hplan2$ for the second, and so on.
Kommentare zu diesen Handbüchern