Cabletron Systems T2015 Installationsanleitung PDF herunterladen (Seite 158)

100

101

148 Installation Guide for Clients

Entries in the [elnkii] section of the LAN Manager PROTOCOL.INI file

have the following meanings:

datatransfer

Sets the data-transfer mode for the network adapter according to the

following values:

Value Compatible Computers

block_dma 8086 and 8088 (fast)

demand_dma 8086 and 8088 (intermediate)

single_dma 8086 and 8088 (slow)

pio_word 80286 and 80386 (fast)

pio_byte 80286 and 80386 (slow)

This entry is ignored when the adapter runs in shared-memory mode.

dmachannel (8086 and 8088 computers only)

Indicates the current DMA jumper configuration of the network

adapter. The value can be 1 or 3.

This entry is ignored when the adapter runs in shared-memory mode.

drivername

Identifies the driver name of the network device driver. The

drivername is elnkii$ for the first EtherLink II adapter, elnkii2$ for

the second, and so on.

interrupt

Indicates the interrupt level of the network adapter.

Note

For an 80286 or 80386 computer, specifying interrupt level 2

redirects to interrupt level 9 because the cascaded PIC is already

using interrupt level 2.

ioaddress

Indicates the current I/O address jumper configuration of the network

adapter. The value you select on the adapter must equal this entry’s

value. If this entry does not match the adapter’s switch settings, the

driver reports an error.

maxtransmits

Specifies the number of transmit queue entries in this driver. For an

OS/2 server, multiply the size of the transmit window by the

maximum number of sessions.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 418 419

Kommentare zu diesen Handbüchern

Keine Kommentare

Cabletron Systems T2015 Installationsanleitung Seite 158

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cabletron Systems T2015