
168 Installation Guide for Clients
Cabletron T3015
Required entry:
• drivername = t30ndis$ or t30ndisn$
The following table summarizes the possible entries and values in the
[t30ndis] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
bandwidth integer 0 or 1 0
drivername — — t30ndis$ or
t30ndisn$
maxmulticast integer 6–50 10
maxrequests integer 2–10 6
maxtransmits integer 2–10 6
media — pri, sec pri
receivebuffers integer 2–10 6
receivebufsize integer 256–4096 4096
receivechains integer 2–10 6
timing — alt, def def
Entries in the [t30ndis] section of the LAN Manager PROTOCOL.INI
file have the following meanings:
bandwidth
Sets the token ring speed for the network adapter. Use 0 for 16 MBS,
or use 1 for 4 MBS.
drivername
Identifies the driver name of the network device driver. The base
portion of the filename, plus a digit when more than one TokenLink
adapter is installed, is the drivername. The drivername is t30ndis$
for the first network adapter, t30ndis2$ for the second, and so on.
maxmulticast
Specifies the maximum number of multicast addresses that the driver
allows.
maxrequests
Specifies the maximum number of general requests that can be
pending at one time.
maxtransmits
Specifies the number of transmit queue entries in this driver.
Kommentare zu diesen Handbüchern