
258 Installation Guide for Clients
Standard Microsystems SMC ARCNET Adapters
Required entry:
• drivername = smc_arc$
This driver is for the following network adapters:
• SMC ARCNET PC130
• SMC ARCNET PC130E
• SMC ARCNET PC270E
• SMC ARCNET PC550W
• SMC ARCNET 600W
• SMC ARCNET 600WS
The following table summarizes the possible entries and values in the
[smc_arc] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
cache
(PC550W only)
integer 0, 1 0
drivername — — smc_arc$
interrupt integer — 2
iobase hex. — 2E0
i/o_8_bit
(PC550W only)
integer 0, 1 0
memorybase hex. C000-D000 D000
micro_channel integer 0, 1 0
Entries in the [smc_arc] section of the LAN Manager PROTOCOL.INI
file have the following meanings:
cache (PC550W only)
Identifies the existence of a hardware cache. Set this entry to 1 if a
hardware cache is present; 0 if a hardware cache is not present. This
entry is only used for the PC550W adapter.
drivername
Identifies the driver name.
interrupt
Identifies the interrupt level of the network adapter.
iobase
Indicates the I/O base port number as set by the configuration
switches.
Kommentare zu diesen Handbüchern