Cabletron Systems T2015 Installationsanleitung PDF herunterladen (Seite 270)

100

101

260 Installation Guide for Clients

Thomas Conrad Token Ring

Required entry:

• drivername = tcctok$

The following table summarizes the possible entries and values in the

[tcctok] section of the LAN Manager PROTOCOL.INI file:

Entry Units Range Default

dmachannel integer 1, 5, 6, 7 5

drivername — — tcctok$

interrupt integer — 3

iobase hex. See explanation 1A20

microchannel —— —

netaddress hex. 400000000000 – 40007FFFFFFF —

packetsize integer 512–17408 4096

Entries in the [tcctok] section of the LAN Manager PROTOCOL.INI file

have the following meanings:

dmachannel

Specifies the DMA channel on the network adapter. This value must

match the adapter’s jumper settings.

drivername

Identifies the driver name of the network device driver.

interrupt

Indicates the interrupt level of the network adapter. The interrupt

level can be 2/9, 3, 4, 5, 6, 7, 10, 11, or 12. The default setting is 3.

iobase

Indicates the current I/O address jumper configuration of the network

adapter. This value can be 1A20, 2A20, 3A20, 3A40, 3A60, 3A80,

3AA0, or 4AE0. The “primary” address jumper selects I/O address

1A20, the “secondary” address jumper selects I/O address 2A20.

These addresses must not conflict with I/O addresses of other

installed devices.

microchannel

Denotes the use of a TC4046 Micro Channel Token-Ring network

adapter. When this parameter is used, it will automatically set the

interrupt, dmachannel, and iobase parameters.

1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 418 419

Kommentare zu diesen Handbüchern

Keine Kommentare

Cabletron Systems T2015 Installationsanleitung Seite 270

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cabletron Systems T2015