Cabletron Systems T2015 Installationsanleitung PDF herunterladen (Seite 211)

100

101

Chapter 9 Network Device Driver Options 201

ICL Etherteam 16

Required entry:

• drivername = ethiie$

The following table summarizes the possible entries and values in the

[ethiie] section of the LAN Manager PROTOCOL.INI file:

Entry Units Range Default

drivername — — ethiie$

irqnumber integer 2–15 2

ioaddress hex. 290–320 300

maxtransmits integer 1–50 6

netaddress hex. 12 hex. digits —

transceiver — — auto

Entries in the [ethiie] section of the LAN Manager PROTOCOL.INI file

have the following meanings:

drivername

Identifies the driver name.

irqnumber

Identifies the interrupt level configuration of the network adapter.

The software-configurable interrupt values are: 2 (or 9), 5, 12, and

15.

ioaddress

Indicates the current I/O address jumper settings of the network

adapter. This entry has four possible values: 0x290, 0x300, 0x310,

and 0x320.

maxtransmits

Specifies the number of transmit queue entries in this driver.

netaddress

Indicates the network address of the Etherteam 16 board. The default

is the unique address programmed to the ID-PROM of the board

("00004B01xxxx").

transceiver

Identifies the physical interface to Ethernet. The software

configurable values are bnc, dix, and auto. The bnc entry specifies

the physical connection to thin Ethernet through a bnc connector, and

the dix entry specifies the physical connection to a thick Ethernet

through a 15-pin dix (aui) connector of the Etherteam 16 board. The

auto value means that the driver searches the connection itself,

attempting first bnc, then dix.

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 418 419

Kommentare zu diesen Handbüchern

Keine Kommentare

Cabletron Systems T2015 Installationsanleitung Seite 211

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cabletron Systems T2015