
172 Installation Guide for Clients
Compaq NE3200
Required entry:
• drivername = ne3200$ or ne3200n$
This driver is for the following network adapters:
• Compaq NE3200
• Intel EtherExpress 32
• Novell NE3200
The following table summarizes the possible entries and values in the
[ne3200] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
drivername — — ne3200$ or
ne3200n$
maxframesize integer 256–1514 1514
maxmulticast integer 0–50 20
maxreceives integer 3–30 15
maxrequests integer 3–10 5
maxtransmits integer 3–100 5
netaddress hex. 12 hex. digits —
Entries in the [ne3200] section of the LAN Manager PROTOCOL.INI
file have the following meanings:
drivername
Identifies the driver name of the network device driver. The base
portion of the filename, plus a digit when more than one driver is
installed, is the drivername. The drivername is ne3200$ for the first
driver, ne32002$ for the second driver, and so on.
maxframesize
Specifies the size of the receive and transmit buffers in bytes. This
limit refers to the portion of the frame from the destination address
field through the last byte of data. The frame check sequence field is
not included.
maxmulticast
Specifies the maximum number of multicast addresses that the driver
allows.
maxreceives
Specifies the maximum number of receive buffers that can be queued
at one time.
Kommentare zu diesen Handbüchern