Cabletron Systems T2015 Installationsanleitung Seite 184

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 419
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 183
174 Installation Guide for Clients
Compex ENET16/U
Required entry:
drivername = enet$ or enetn$
The following table summarizes the possible entries and values in the
[enet] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
drivername enet$ or enetn$
interrupt integer 2, 3, 4, 5, 7, 10,
11, 15
3
iobase hex. 200–340 280
maxtransmits integer 1–50 10
ramaddress hex. B000–EC00 D000
Entries in the [enet] section of the LAN Manager PROTOCOL.INI file
have the following meanings:
drivername
Identifies the driver name of the network device driver. The base
portion of the filename, plus a digit when more than one driver is
installed, is the drivername. The drivername is enet$ for the first
driver, enet2$ for the second driver, and so on.
interrupt
Indicates the interrupt level of the network adapter.
iobase
Indicates the base I/O address for the network adapter. If this entry
does not match the adapter’s I/O address jumper settings, the driver
reports an error.
maxtransmits
Sets the maximum number of transmission requests that can be
simultaneously queued by the driver.
ramaddress
Indicates the base address of the shared memory on the adapter.
Seitenansicht 183
1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 418 419

Kommentare zu diesen Handbüchern

Keine Kommentare