Cabletron Systems T2015 Installationsanleitung Seite 284

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 419
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 283
274 Installation Guide for Clients
Western Digital EtherCard Plus and EtherCard Plus/A
Required entry:
drivername = macwd$
The following table summarizes the possible entries and values in the
[macwd] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
drivername macwd$
iobase (EtherCard Plus
only)
hex. 200–3E0 280
irq (EtherCard Plus only) 2–15 3
maxrequests integer 6–24 8
maxtransmits integer 6–24 12
ramaddress (EtherCard
Plus only)
hex. A000–FFFF D000
receivebuffers integer 6–24 12
receivebufsize bytes 256–1536 256
receivechains integer 6–24 12
Entries in the [macwd] section of the LAN Manager PROTOCOL.INI
file have the following meanings:
drivername
Identifies the driver name of the network device driver.
iobase (EtherCard Plus only)
Indicates the base I/O address for the network adapter. This entry
must match the adapter’s I/O address jumper settings.
irq (EtherCard Plus only)
Indicates the interrupt level of the network adapter.
Value Meaning
2–7 EtherCard Plus: interrupt levels 2–7
3, 4, 10, 15 EtherCard Plus/A (16-bit slot only): interrupt levels 3, 4, 10,
and 15
maxrequests
Specifies the number of request-queue entries.
maxtransmits
Specifies the number of transmit-queue entries.
ramaddress (EtherCard Plus only)
Indicates the base address of the shared memory on the adapter.
receivebuffers
Specifies the number of receive-buffer queue entries.
Seitenansicht 283
1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 418 419

Kommentare zu diesen Handbüchern

Keine Kommentare