
13
CHAPTER 2
Planning for Installation and
Configuration
This chapter helps you make the decisions necessary to install and
configure LAN Manager workstations. (Workstations are also referred
to as clients.) This chapter provides the following:
• Forms for planning and recording the LAN Manager workstation
configurations
• Detailed information for planning LAN Manager installations and
configurations on MS-DOS and OS/2 computers
Configuration Planning Forms
Configuration planning forms are provided here to help you prepare to
install LAN Manager workstation software. The forms list the
information you will need to provide when installing or configuring
LAN Manager workstations. Where appropriate, the forms list the
possible range of values that can be used for a given parameter, and
they show the LAN Manager default setting (if one exists) for that
parameter.
There are three planning forms:
• Figure 2.1, Planning for MS-DOS Enhanced Workstations
• Figure 2.2, Planning for MS-DOS Basic Workstations
• Figure 2.3, Planning for OS/2 Workstations
Two sections follow the forms to explain and interpret the information
in the forms: “
Planning for LAN Manager Installations on MS-DOS
Computers,”
“Planning for LAN Manager Installations on OS/2
Computers.”
It is recommended that you photocopy the configuration
planning forms and fill them in while reading those sections.
You can then use the completed forms as a ready reference during
installation or configuration of individual workstations. You can also
save and file the forms as a written record of the workstation
configurations on your network.
Kommentare zu diesen Handbüchern