
162 Installation Guide for Clients
Cabletron E2010-X
Required entry:
• drivername = e20ndis$ or e20ndisn$
The following table summarizes the possible entries and values in the
[e20ndis] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
drivername — — e20ndis$ or
e20ndisn$
interrupt integer 3, 4, 5, 6, 7, 9, 10,
11, 12, 14, 15
3
ioaddress hex. 220, 280, 300,
380
380
Entries in the [e20ndis] section of the LAN Manager PROTOCOL.INI
file have the following meanings:
drivername
Identifies the driver name of the network device driver. The
drivername consists of the base portion of the filename, plus a digit
when more than one adapter is installed. The drivername is e20ndis$
for the first adapter, e20ndis2$ for the second, and so on.
interrupt
Indicates the interrupt level of the network adapter.
ioaddress
Indicates the base I/O address for the network adapter. If this entry
does not match the adapter’s I/O address jumper settings, the driver
reports an error.
Kommentare zu diesen Handbüchern