Cabletron Systems MT8-MIM Spezifikationen PDF herunterladen (Seite 68)

Chapter 7: Ethernet Problems

7-6 Troubleshooting Guide

7.4 User Configurable Parameters for a Device Are Lost When That Device Is

Powered Down

Does the device have a battery backup feature for NVRAM?

Check the NVRAM reset switch for proper setting. Refer to the device documentation for the proper setting. Power up

the device. Reenter the user configurable parameters. Power down the device. Then power up the device to see if the

new parameters were retained.

Were the user configurable parameters retained?

Call Cabletron Technical Support.

Congratulations, the problem is solved.

Check the positioning of the battery enable/disable jumper. Make sure that the jumper is in the battery enable position. Refer

to the device documentation for jumper location and setting. Power up the device and reenter the user configurable

parameters. Power down the device. Then power up the device to see if the reentered configuration parameters were

retained.

Were the user configurable parameters retained?

Call Cabletron Technical Support.

Congratulations, the problem is solved.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 113 114

Keine Kommentare

Cabletron Systems MT8-MIM Spezifikationen Seite 68