Cabletron Systems MT8-MIM Spezifikationen PDF herunterladen (Seite 110)

Appendix A: Router Password Recovery Procedures

A-2 Troubleshooting Guide

A.1 Procedure for Cisco Model IGS (Prior to Rev. 9.1)

To recover the password, proceed as follows:

1. Connect a terminal or PC to the COM port of the router.

NOTE: On some routers, the COM port may be labeled CONSOLE.

2. Power down the router.

3. Record the original settings of the hardware configuration register dipswitch. (Refer to the router

documentation for the location of the switch.)

4. Set switch 8 to the ON (or closed) position and set switches 1 through 7 to the OFF (or open) position.

5. Power up the router.

6. At the terminal or PC, press Return until the

Test-System> prompt displays.

7. Type in:

enable at the Test-System> prompt.

Press Return.

Type in:

show config at the Test-System> prompt.

Record the password(s).

8. Power down the router. Then return the hardware configuration register dipswitch to its original settings.

9. Power up the router.

1 2 ... 105 106 107 108 109 110 111 112 113 114

Keine Kommentare

Cabletron Systems MT8-MIM Spezifikationen Seite 110