Cabletron Systems MT8-MIM Spezifikationen PDF herunterladen (Seite 45)

Troubleshooting Guide 5-3

5.2 The Router Does Not Boot Normally

With a terminal or PC connected to the router COM or CONSOLE port, access the Local Management application and note

the prompt displayed, if any.

Did the “Router(boot)>” prompt display?

Did the “System Configuration Dialog” display with the following message?

Configuration interface IP parameters for netbooting:

Did the System Configuration Dialog display?

Call Cabletron Technical Support.

Enter the information requested. Then press Return.

Did the “Router(boot)>” prompt display?

Call Cabletron Technical Support.

At the prompt, type in:

The prompt, Router(boot)# displays.

Type in:

config t

Press Return.

Type in:

config-register 0x2102

Press Return.

Press CTRL-Z

Type in:

reload

Press Return.

Does the router boot normally?

Did the prompt “Router(boot)>” display?

Did the normal “Router>” prompt display with the router still trying to load its configuration

off the network?

(For example: “Loading network | config... [timeout]”)

Call Cabletron Technical Support.

Wait until the router stops trying to load its configuration off the network.

Press Return.

The prompt

Router > displays.

At the prompt, type in:

en and enter the enable password.

Type in:

config t

Press Return.

Type in:

no service config

Press Return.

Press CTRL-Z

Press Return.

Type in:

Press Return.

(continue)

ABCD

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 113 114

Kommentare zu diesen Handbüchern

Keine Kommentare

Cabletron Systems MT8-MIM Spezifikationen Seite 45

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cabletron Systems MT8-MIM