Cabletron Systems RoamAbout Betriebsanweisung PDF herunterladen (Seite 84)

Basic Problem Solving

5-4 Problem Solving

Table 5-3, Table 5-4, and Table 5-5 list common conditions and the corresponding

states of the LED indicators.

Wireless LAN Activity

LED (6) is blinking a short

on once per second.

There is no activity on

the wireless LAN. If

you know there is

activity on the wireless

LAN, then this status

indicates that the PC

Card has an incorrect

wireless parameter or is

not operating properly.

Reconfigure the

wireless parameters.

Ensure that the AP and

all wireless clients in the

AP’s coverage area

have the same wireless

parameters.

Verify that the PC Card is

installed properly.

Bridge State LED (4)

is on.

Self-test in progress, or

a spanning tree

reconfiguration is

underway.

Otherwise, this status

may indicate that there

is a redundant AP

handling the network

traffic and that this AP

is in Standby mode.

Wait until self-test or

reconfiguration ends.

If the AP is in Standby

mode, verify your

network configuration to

determine whether there is

another AP configured to

operate in the same

coverage area.

Bridge State LED (4) is

blinking.

Downline load is in

progress.

Wait for downline load to

complete.

PC Card Present LED (7)

is off.

There is no PC Card

installed in the slot, or it

is not properly inserted.

Turn off power and insert

the PC Card into the AP.

Table 5-2: LED Problem Solving Summary (Continued)

If... Then... Do This...

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare

Cabletron Systems RoamAbout Betriebsanweisung Seite 84

Kommentare zu diesen Handbüchern