Cabletron Systems RoamAbout Betriebsanweisung PDF herunterladen (Seite 58)

Access Point Installation Menu

4-14 Configuring Your Access Point

RoamAbout Access Point INSTALLATION MENU

[3] Show Current Settings

This option shows the AP’s current settings.

NOTE

If the module is being configured for the first time, some fields are blank.

The following example shows the dialog associated with this option.

==============================================================================

RoamAbout Access Point, Wireless-to-Wired Bridge: HW=V1.0, RO=V1.4, SW=V3.

SysUpTime : 00:26:37 98 resets

SNMP Read/Write Community : public

SNMP Trap Addresses : Not Configured

In-Band Interface Hardware Address : 08-00-2B-A3-89-61

In-Band Interface IP Address : 16.20.40.156

In-Band Interface Subnet Mask : 255.0.0.0

In-Band Interface Default Gateway : Not Configured

Wired Ethernet MAC Address : 08-00-2B-A3-89-61

Wireless Ethernet MAC Address : 00-60-6D-92-00-FB

Wireless Network Adapter : RoamAbout IEEE 2.4 GHz DS

Adapter Revisions : Hardware 1.256 Firmware 1.01

Bridge Mode : Work Group

Upline Dump : DISABLED

Memory : 4194304 bytes

==============================================================================

Press Return for Main Menu ...

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 89 90

Keine Kommentare

Cabletron Systems RoamAbout Betriebsanweisung Seite 58