Cabletron Systems WPIM-DDS Installationsanleitung PDF herunterladen (Seite 59)

HSIM-W6 Installation Guide A-1

WPIM Cable Speciﬁcations

WPIM-T1

This section provides the Cabletron Systems part number and connector speciﬁcations for

WPIM-T1 interface cables.

Table A-1 provides connector type and part number information.

Table A-2 provides RJ48 connector pin assignments.

NOTE

For all WPIM cables, there is part number information for ordering a standard 20-foot

cable or a speciﬁed length of cable. The number 20 followed by the part number

denotes the standard 20-foot cable. The letter “L” denotes the speciﬁed length required

in feet or meters. For example: 9372095-3 denotes a 3-foot cable; 9372095-3M

denotes a 3-meter cable.

Table A-1 T-1 Interface Cable Part Numbers

Connector Type Part Number

RJ48C 9372094

Table A-2 T-1 Connector Pin Assignments

Pin Signal

1 Receive Ring

2 Receive Tip

3 Not Used

4 Transmit Ring

5 Transmit Tip

6 Not Used

7 Shield Ground

8 Shield Ground

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 91 92

Keine Kommentare

Cabletron Systems WPIM-DDS Installationsanleitung Seite 59